How To Build A Door Ov Er A Cellerv Intrance Lon Youtube

Jul 07,2014

Hither's the question I get most about basement framing basement doors…How broad do I frame the opening in the wall for my doors? This is a very good question! And…I have a very simple answer!

What size "rough opening" width do I frame my basement door?

So here'due south what you do… Y'all frame your door opening two″ wider than the size door you are going to installing!

I'll repeat that…Yous frame your door opening ii″ wider than whatever size door you are going to installing! Elementary right? Hither's a few instance door sizes showing how information technology works out:

Installing a 24″ door…Frame the opening width 26″
Installing a 30″ door…Frame the opening width 32″
Installing a 36″ door…Frame the opening width 38″

And so on.

What size "rough opening" meridian do I frame my basement door?

Next question well-nigh door framing…How high should the door opening be framed for my doors? This would exist measuring from the concrete floor to the of the bottom of the"header" at the top of the framed door opening. This is also a practiced question with a Real simple answer! The reply is: The framed opening for all standard basement door is 82″. From the concrete flooring to the bottom of the header framing volition always be 82″.

How To Frame For Basement Doors (and other basement door ideas)

Below is a quick video discussing door framing and rough opening sizes.

What if I'm installing a big 5′ or six′ double door permit'southward say for a closet?

The same exact rough opening rules apply to whatever size door you are going to be installing, including the Big BAD 4′, five′ and six′ "double door variety.

How To Frame For Basement Doors (and other basement door ideas) Permit'southward use a five′ double door to do our figuring for the crude opening width size. A 5′ double door measures 60″ and then the rough opening width of a lx″ wide door would be 62″.

60″ wide door + 2″ = 62″ (crude opening width). We just add two″ to the door size just similar any other standard size door. The height for double broad door volition nevertheless be 82″ exactly like whatever other standard size door would be framed.

** Now occasionally I will frame my door header peak at 82 1/2″ to 83″ just to exist on the safe side. And I will simply do this if the concrete flooring is really uneven. It'south OK to exist a 1/2″ to and 1″ higher for the door crude-opening height, only if you can help information technologyNEVER be less than 82″.

That's it for figuring the correct "Crude-opening" framing for standard sized basement doors!

What if my ceiling pinnacle is less than 82″…Then what?

Here's a common problem in basements. The height of the ceiling where you desire to place your door is less than the required 82″ of height you need to frame so that a standard door will fit in the opening.

How To Frame For Basement Doors (and other basement door ideas) Well…Aye this does suck! I believe that'southward what I say every time this happens to me! So hither'south what we do to remedy this unfortunate situation…Nosotros CUT THE DOOR DOWN TO THE SIZE WE Demand TO MAKE It FIT! So what does this hateful for our door framing size? I'grand glad you asked…your so inquisitive! Well…normally when this happens you lot are framing either under your duct-work trunks(heating and cooling runs) or your under a basement beam, or some other "low-hanging-fruit" higher up your head. What I do is just frame my wall under the low obstacle, as close to the bottom of the obstruction as I tin get my wall to fit, and and so I'll ONLY FRAME THE DOOR ROUGH OPENING WIDTH, and forget about installing a header for the top the door opening!

What happens then is the Top Plate of the wall becomes the header superlative naturally. And then any the acme of the pinnacle plate is, this becomes the height of my rough door opening…period. So if it measure say…78″ from the floor to the bottom of my Top wall plate, that means my door opening header acme has go 78″.

Merely how can this work when I need 82″ for a standard door to fit yous inquire? Well.. it means that the divergence between the 82″ and 78″(that'south = 4″) will need cutting off the bottom of the door and the door jamb frame when yous set the door later in the project, so that the door will then fit!

Recap…So just frame under those Depression Obstacles what ever the height is…it is, and yous will merely cut the door to fit when it comes time to set your doors and trim the basement.